Stryker System 7 Dual Trigger Rotary Handpiece
7205-000-000
► Brief Introduction of Stryker System 7 Dual Trigger Rotary Handpiece 7205-000-000
The Stryker System 7 High-Performance Battery System is designed for cutting, drilling, stripping, and smoothing bone and other osseous tissue during various surgical procedures. It can also be used for inserting screws, wires, pins, and other fixation devices.
NOTE: The Stryker System 7 Dual Trigger Rotary Handle (handpiece) is part of the Stryker System 7 High-Performance Battery System.
► Specification of Stryker System 7 Dual Trigger Rotary Handpiece 7205-000-000
| Product Name | Stryker System 7 Dual Trigger Rotary Handpiece 7205-000-000 |
| Brand | Stryker |
| Model No | System 7 Dual Trigger Rotary Handpiece (REF 7205-000-000 |
| Dimensions: | 153 mm [6.1 inch] height 38 mm [1.5 inch] width 153 mm [6.1 inch] length |
| Mass: | 0.99 kg [2.2 lb] |
| Speed: | 1200 rpm (drill) 270 rpm (ream) |
| Power Supply: | Internally Powered Refer to battery housing for voltage rating. |
| Maximum Temperature of Applied Part: | Less than 51 °C [124 °F] |
► Feature of Stryker System 7 Dual Trigger Rotary Handpiece 7205-000-000
A Function Switch – Locks one or both of the triggers.
B Shift Collar – Sets the speed and torque
C Attachment Collar – Retains the attachment in the handpiece
D Attachment – A variety of attachments are available for use with this handpiece. Each attachment has a specialized retainer for wires, pins, tools and/or cutting accessories.
E Applied Part – The distal end of the handpiece and the attachment (as defined by the standards listed in the Specifications section under Product Safety Certification).
F Reverse Trigger – Controls the variable speed operation of the handpiece in a counterclockwise direction.
G Forward Trigger – Controls the variable speed operation of the handpiece in a clockwise direction.
► To Install the Attachment and Accessory
- Insert the attachment into the handpiece until the attachment snaps into place.
NOTE: If the attachment has notches, align one of the notches with a tab under the attachment collar before insertion.
- Gently tug the attachment to make sure the attachment is securely locked in the handpiece.
- Install a wire, pin, tool, or cutting accessory as required.
Thank you so much for your attention .If you're interested in Stryker System 7 Dual Trigger Rotary Handpiece 7205-000-000 For Repairing ,feel free to contact us .Thank you .
|
|
Stryker System 7 Dual Trigger Rotary Handpiece 7205-000-000 For Repairing Images
|
